Tides Marine - Sail Track and Slide

Online Order Form

After reading the Sail Track brochure please complete:

Part A - Choose section 1,2 or 3 to suit your mast.
Part B - Slides and Batten Receptacles, Billing and Shipping information.

If you have any questions about your measurements, please contact us.

Items in RED must be completed for the relevant section.

Phone: +61 7 5449 0064

Fax: +61 7 5449 0094

E-mail: info@marineoemsupply.com

Order Date:

Required By:

Part A

1. Internal Luff Groove Information Mast Gate Size and Location

A	Slot Width (Letter from blue disk)	D*	Length from top of mast gate to the point on the mast where the Tides Track will end
B	Lip Thickness (Number from blue disk)	E	Track Length - Masthead to point at or near the gooseneck
C*	Length of mast gate

Your mast gate length (C) must be at least 3" long. The top of the mast gate must be at least 10" above the gooseneck (D).

*If your current mast gate configuration does not meet both of these measurements, you will have to modify your existing mast gate accordingly. Measurements C and D must reflect the "modified" mast gate measurements (see catalogue pages 6 or 10).

Internal Width of Existing Luff Groove

Please refer to page 8 of the catalogue for measurement guidelines to identify these dimensions.

Internal Flat Section - Width OR

Internal Round Section - Diameter

2. External Track Information

A - Width of existing external track

5/8"

7/8"

Other:

B - Length of your existing external track:

If your track width measures 1", you will need to cut 2"-3" from your existing external track and send it to Marine OEM Supply. We will measure the track width - cut a sample piece of Tides Track - and send it to you to test over the length of metal track on your vessel.

If your track width does not match the 5/8" or 7/8" options, please follow the same instructions as noted above.

3. CMPE Track Information

A - Length of Tides Track required:

B - How many reef points are on your sail:

Note: Tides Marine will supply the correct number of CMPE Fasteners for your sailtrack.

Part B

Slides and Batten Receptacles

Your Tides Track System comes with a MAXIMUM of one slide for every two feet of track. If more slides are required, they may be purchased from Marine OEM Supply. (See catalogue p14 - 19.)

Quantity	Quantity
SH-200A Batten Receptacle - Small	SH-400 SH-401 Slide with 10mm Stud
SH-200B Batten Receptacle - Large	SH-402 Universal with 10mm Stud
SH-500 Headboard Slide	SH-403 Slide for original Battslide
SH-401 Reef Slide	SH-600 Intermediate Slide

BILLING INFORMATION		SHIPPING INFORMATION Same as Billing Information
Customer Name		Customer Name
Contact Name		Contact Name
Address		Address
Address 2		Address 2
City / State / Postcode		City / State / Postcode
Phone Number		Phone Number
E-Mail Address		E-Mail Address

Comments:

*You will be contacted for payment information on receipt of order.